Shop

Solid front pressure manometers are built in accordance with UNI 8541, DIN 16006 and ANSI B40.1 standards. By building this type of instrument, particular attention is paid to safety , which is obtained by means of a protection diaphragm interposed between the manometric element and the dial, and a fragile diaphragm which allows any pressure to be released from the rear part of the case. of the pressure gauge.
DN 100 and 150, measuring ranges between 1 and 4000 bar.

These manometers have as a principle a membrane which, under the pressure of the process fluid, acts directly on the movement. It is possible to use this type of instrument when it is necessary to detect the pressure of fluids with high viscosity or with the possibility of crystallization or solidification.
Measuring ranges between -40 mbar and 25 bar
DN 100 and 150

Strong and accurate instruments for general use for the measurement of non-aggressive and non-crystallizing fluids

Dry or liquid filled version

• Materials:
  Stainless steel case AISI 304,
  AISI 316 per DN 100 e 150
  Parts in contact: Brass / Copper alloy
• Nominal diameter (mm):
  63 – 80 – 100 – 150
• Scale ranges:
  da 0/0,6 a 0/600 bar and vacuum